Industry Trends

Company News

Do I need to replace bearings in a noisy high-speed motor?

Published:

2022-11-07

Bearings as the core components of high-speed motors, in the high-speed motor is widely used today, in the use of bearings often appear some noise, for these noises, many motor operators will appear some of these questions: bearing noise, what is the reason, with or without a new bearing. For these questions, today will give you a high-speed motor noise when the need to replace the bearing.

Bearings as the core components of high-speed motors, in the high-speed motor is widely used today, in the use of bearings often appear some noise, for these noises, many motor operators will appear some of these questions: bearing noise, what is the reason, with or without a new bearing. For these questions, today we will tell you whether you need to replace the bearings when there is noise in the high-speed motor.

Bearing noise is mostly due to some problems with the bearings, many customers encounter bearing noise problems, it is a direct replacement of a new bearing, which is certainly a solution, but in fact, sometimes it is not necessary to replace the new.

Replacement bearings in addition to whether there is noise to judge, but also according to the life of the bearing and wear to determine, and not a noise to replace the bearing. Usually, bearing noise is the cause of bad bearings. High-speed motor in the use of high-speed rotation, bearings are very critical; bearings are high-speed motor high-speed rotation of the most core components. Bearing noise, generally is the bearing raceway lack of oil.

If the sound is only loud, the bearing and no other abnormalities, then it is not necessary to replace the bearing, should pay attention to the appropriate increase in water circulation to improve the cooling effect, try not to run for a long time, work for a period of time, it is appropriate to stop to cool down. However, if the bearing produces a violent vibration when working, this represents the bearing wear situation is very serious, even if there is no noise to replace the bearing.

key word:

previous

Take care not to damage the following parts during disassembly of the high-speed motor

Nothing

next

previous：

Take care not to damage the following parts during disassembly of the high-speed motor

next：

Nothing

Hot News

Share to

Back to list