行业动态

更多 >>

商机资讯

How does the performance of an electric spindle assembly relate to the bearings?

Machine tool bearing accuracy and quality are key factors affecting the performance of machine tool spindles. For how to define the precision level of a precision bearing, only the width tolerance of the inner and outer ring, roundness, verticality, taper, axial runout and radial runout are defined. To make the machine tool spindle can achieve high precision, high speed, high stiffness and low vibration and heat requirements, it is necessary to control more parameters of the bearing itself.

High-speed electric spindle troubleshooting

The system has a corresponding electric spindle signal output, but the power supply line and the control signal output line have a break or the components are damaged. Treatment: Use a multimeter to check if there is a break in the power supply circuit and signal control circuit between the system and the spindle motor.

What are the ways to reduce the failure rate of electric spindles?

The electrospindle is in close contact with the bearing outer ring end face and the threaded section and end face have high perpendicularity requirements and can be checked by contact. If the electric spindle has 80% contact, the end faces can be lapped to meet the perpendicularity requirements. This work is important. Its accuracy affects the radial runout of the grinding spindle and thus the surface roughness of the ground workpiece.

Analysis of forced shutdown situations for electric spindles

Under normal circumstances, electric spindles need to follow the steps to shut down after use, but sometimes there are situations where the spindle has to be forced to shut down. For example, the temperature of the electric spindle bearing has risen sharply and has reached the alarm value, which requires a mandatory shutdown; or the electric spindle bearing or the sealed area is smoking, which requires a mandatory shutdown.

China's motor industry development status and its development prospect

Motor as one of the indispensable components of mechanical equipment, at present, China's motor industry after more than 40 years of development, especially the rapid development of reform and opening up since more than 20 years, has made great progress. According to the "2014-2018 China Electric Motor Manufacturing Industry Market Demand and Investment Planning Analysis Report" released by the Foresight Industry Research Institute: the rapid development of new energy has driven the rapid growth of the motor industry, and China's motor industry has broad prospects for development.

Common mechanical failures of high-speed motors

CNC machine tools mostly use high-speed motors, mainly because high-speed motors have hard mechanical characteristics, good stability; no differential loss, high efficiency, simple wiring, easy control, low price, high efficiency smooth speed regulation, and high speed, high power, speed change quickly, reliable; can steplessly variable speed and other characteristics. So what are its common failures?

产品标签

Jiesite Electrical

High speed motor

Motorized spindle